Churchich Recreation Blog

While children across the country have been enjoying the final days of their summer vacation, schools have been far from silent as teachers and facility staff perform their annual preparation for the coming school year.

In classrooms, decorations and calendars are being posted, lesson plans crafted, and supplies like blackboard chalk, whiteboard markers, and No. 2 pencils are being organized.

Inside the building, hallways, cafeteria, and gym floors are being scrubbed and buffed to a shiny finish in anticipation of tiny feet, and HVAC systems, school bathrooms and other facilities are receiving their annual maintenance.

As the summer days wind down and the excitement of a new school year builds, it's also time to turn your attention to an often overlooked but crucial aspect of the school environment: the playground.

At Churchich Recreation and Design, we believe that playgrounds are more than just a place for recess; they're vital spaces for learning, social development, and physical activity. That's why proper preparation of these areas is essential for a successful school year.

In this guide, we'll walk you through the key steps to ensure your school's playground is safe, engaging, and ready for the influx of eager young minds and bodies. From safety checks to innovative play elements, we've got you covered.

Safety First: The Essential Playground Inspection

Before the first bell rings and the Pledge of Allegiance is recited, a thorough safety inspection of your school playground is crucial. Here's what to focus on:

• Equipment Check: Examine all play structures for loose bolts, cracked plastics, or worn metal parts. Check for dangerous hardware such as open “S” hooks or protruding bolts. Also, check for sharp points or edges in equipment.
  
  
• Surface Inspection: Ensure proper depth and distribution of safety surfacing materials like wood chips or rubber mulch. The Consumer Product Safety Commission (CPSC) recommends surfaces around playground equipment have at least 12 inches of wood chips, mulch, sand, or pea gravel, or are made of safety-tested rubber or rubber-like materials. Protective surfacing should also extend at least 6 feet in all directions from play equipment.
  
  
• Structural Integrity: Check for any signs of rust, rot, or structural weakness in equipment foundations.
  
  
• Entrapment Hazards: Look for any openings that could trap a child's head, limbs, or clothing.
  
  
• Tripping Hazards and Elevated Surfaces: Look for tripping hazards on the playground such as tree stumps, exposed concrete footings, and rocks. Make sure that elevated surfaces, like platforms and ramps, have guardrails to prevent falls.
  
  

Remember, a safe playground is the foundation for positive play experiences. Don't hesitate to bring in professionals for a comprehensive safety audit if you're unsure about any aspects of your playground's condition.

Cleanliness and Sanitization: A Healthy Play Environment

In today's health-conscious world, cleanliness is more important than ever.

Here are some key points to consider:

• Implement a regular cleaning schedule for all high-touch surfaces.
  
  
• Use child-safe, eco-friendly cleaning products to protect both kids and the environment.
  
  
• Pay special attention to enclosed spaces like tube slides or playhouses.
  
  
• Consider installing hand sanitizing stations near the playground entrance and exit.
  
  

A clean playground not only looks inviting but also helps prevent the spread of germs, keeping our children healthier throughout the school year.

“A significant part of playground maintenance is keeping your playground clean,” says Miracle Recreation. “Deep clean with a playground-safe non-toxic cleaning product during the summer and other school breaks to remove accumulated dirt and debris and prepare the equipment for extensive use when school is in session.”

Accessibility: Ensuring Play for All

This summer maintenance period is a great time to make sure your playground is inclusive for children. An inclusive playground is a better playground. Consider these aspects:

• Check that all ramps and transfer stations are in good condition and meet ADA standards.
  
  
• Ensure there are play elements at ground level for children with mobility challenges.
  
  
• Verify that pathways are clear and wide enough for wheelchairs or mobility devices.
  
  
• Include sensory play elements for children with various needs.
  
  

By prioritizing accessibility, we create a space where all children can play, learn, and grow together.

Updating Play Elements: Fresh Experiences for a New Year

Now is the time to add fresh elements to your playground. Keeping your playground exciting is key to encouraging active play. Consider these ideas:

• Introduce one or two new play elements each year to maintain interest.
  
  
• Rotate portable play equipment to create new challenges and experiences.
  
  
• Add nature-based play elements like log balance beams or boulder climbers.
  
  
• Incorporate interactive elements that promote collaborative play.
  
  

Remember, a mix of familiar favorites and new challenges keeps children engaged and excited about playground time.

“When playgrounds get older and less exciting, it’s time to consider an upgrade. Upgrading your playground is helpful for many reasons — it encourages inclusion and safety and creates a positive experience,” says Miracle Recreation.

Age-Appropriate Zones: Catering to All Developmental Stages

Not sure where to start when adding new elements to your playground. Remember that a well-designed playground considers the needs of children at different stages of development. Here's how to create effective zones:

• Early Childhood Area (Ages 2-5)
  • Low platforms with multiple access points.
  • Simple slides and climbers.
  • Sensory play panels.
  • Small-scale swings with bucket seats.

• Middle Childhood Area (Ages 5-12)
  • More complex climbing structures.
  • Overhead activities to build upper body strength.
  • Cooperative play elements like seesaws or tire swings.
  • Open spaces for games and sports.

• Social Spaces for All Ages
  • Shaded seating areas for quiet activities or conversation.
  • Group swings or spinning elements that encourage social interaction.
  • Musical elements that allow for group participation.

By catering to different age groups, we ensure that all children have appropriate challenges and opportunities for growth.

Shade and Comfort: Protecting Our Children

As many school districts start the year in August, children will be hitting the playground in hot weather, sometimes in triple digits! Proper shade is crucial for both comfort and safety. Consider:

• Installing shade sails or canopies over key play areas.
  
  
• Planting trees strategically for natural shade (consult with a landscaper for best results).
  
  
• Providing shaded seating areas for supervisors and resting children.
  
  
• Ensuring water fountains are accessible and in good working order.
  
  

A comfortable playground encourages longer, more engaging play sessions and protects children from excessive sun exposure.

Churchich offers a variety of pre-engineered outdoor tensile shade systems that will protect children from the sun’s dangerous ultraviolet (UV) rays.

Community Involvement: Building Connections Through Play

Engaging the community in playground preparation can be a rewarding experience:

• Organize a "Playground Prep Day" and invite parents, students, and local volunteers.
  
  
• Reach out to local businesses for sponsorship of new equipment or improvements.
  
  
• Collaborate with art students or local artists to add colorful murals or sculptures.
  
  
• Host a "design competition" for new playground features, involving students in the process.
  
  

Community involvement not only helps with the workload but also fosters a sense of ownership and pride in the school's facilities.

Year-Round Maintenance: Keeping the Magic Alive

While summer prep for your school playground is essential to the safety and well-being of your students, it is just the start as year-round maintenance is essential to keep your playground in ready-to-play shape.

Establish a maintenance routine that includes:

• Create a daily inspection checklist for playground supervisors.
  
  
• Schedule monthly deep-cleaning sessions.
  
  
• Plan for seasonal maintenance, such as rust prevention in wet months or wood treatment in dry periods.
  
  
• Set up a system for promptly addressing any reported issues or damages.
  
  

Regular maintenance ensures the longevity of your playground equipment and maintains a safe play environment throughout the school year.

A well-prepared playground isn't just about equipment and safety checks; it's about creating an environment where imagination flourishes, friendships form, and learning extends beyond classroom walls.

At Churchich Recreation and Design, we're passionate about creating these special spaces that enrich communities and provide memorable experiences.

Contact Churchich Recreation and Design today to schedule a consultation or learn more about our playground solutions.